Putty powder is a commonly used material for repairing and filling uneven areas on the wall surface, which can make the wall flat and smooth, and has moisture-proof and mold proof effects. The effect of putty powder on walls often depends on construction technology and surface quality. The following are suggestions for the effect of Jinan putty powder on walls and prevention of problems:
在膩?zhàn)臃凵蠅χ埃枰葘γ媲鍧嵏蓛舨⑻幚砗眉?xì)小裂縫，然后使用專用工具將膩?zhàn)臃劬鶆蛲磕ㄔ趬γ嫔希纬杀訅浩?，后砂紙打磨成光滑表面。注意，施工工具?yīng)該干凈、無雜質，并且要選用適當?shù)哪佔臃鄯N類。
Before applying putty powder to the wall, it is necessary to clean the wall thoroughly and handle small cracks. Then, use a special tool to evenly apply putty powder to the wall, forming a thin layer and flattening it. Then, sandpaper is used to polish it to a smooth surface. Note that construction tools should be clean, free of impurities, and appropriate types of putty powder should be selected.
在施工之前，需要檢查墻面表面是否平整，有無嚴重的裂縫和坑洞，墻面強度是否足夠。若表面質量不好，會對膩?zhàn)臃凵蠅πЧa(chǎn)生一定影響。
Before construction, it is necessary to check whether the surface of the wall is flat, whether there are serious cracks and potholes, and whether the wall strength is sufficient. If the surface quality is not good, it will have a certain impact on the effect of putty powder on the wall.
在膩?zhàn)臃凵蠅?，需要防止墻面裂縫重新出現，膩?zhàn)臃蹌兟涞惹闆r。為此，可選購品質好的膩?zhàn)臃郏⑶以谕磕ê?，要注意保持室?nèi)的濕度和通風，讓膩?zhàn)臃鄢浞指稍铩?/div>
After applying putty powder to the wall, it is necessary to prevent the recurrence of wall cracks and peeling of putty powder. To achieve this, high-quality putty powder can be purchased, and after application, attention should be paid to maintaining indoor humidity and ventilation to allow the putty powder to dry thoroughly.
![濟南膩?zhàn)臃? src=]()
刮膩?zhàn)邮┕で?，需要先用尺子來進行測量，看看墻面是否水平，以便于確定刮膩?zhàn)拥姆绞健９文佔右话闶┕杀榧纯?，不僅讓墻面更加平整，而且能將底色覆蓋掉。如果墻面不平整的地方，則涂刮多遍膩?zhàn)觼磉M(jìn)行找平處理，但每道膩?zhàn)邮┕らg隔應在兩三小時，確保墻面充分干燥。
Before applying putty, it is necessary to measure with a ruler to see if the wall is level, in order to determine the method of applying putty. Puttying is usually done twice, which not only makes the wall smoother but also covers the base color. If the wall is uneven, apply multiple layers of putty for leveling treatment, but the interval between each layer of putty construction should be two to three hours to ensure that the wall is fully dry.
檢查基面及基層清理，包括清除墻面砂灰結塊、浮砂及塵土，以提高膩?zhàn)臃鄣氖┕っ婊鶎拥钠秸群透街?，確?；鏌o污染，無空鼓，無縫隙，無疏松無掉粉現象。
Check the cleaning of the base surface and base layer, including removing sand and ash lumps, floating sand, and dust from the wall surface, to improve the smoothness and adhesion of the putty powder construction surface base layer, and ensure that the base surface is free from pollution, hollowing, gaps, looseness, and powder loss.
如果使用普通膩?zhàn)?，或耐水膩?zhàn)?，則輕體墻、隔墻板之間接縫處、家具和墻面接縫處、墻面開槽處等部位更好采用貼布處理工藝。如果使用彈性膩?zhàn)泳涂梢圆挥觅N布處理，直接批刮即可。
If ordinary putty or water resistant putty is used, it is best to use the adhesive treatment process for the joints between lightweight walls, partition boards, furniture and wall joints, and wall grooves. If elastic putty is used, it can be directly scraped without applying cloth.
總之，膩?zhàn)臃凵蠅πЧ脡娜Q于施工技術和表面質量，預防問題則需要注意選擇合適的膩?zhàn)臃鄄牧虾捅３诌m宜環境條件。如果有什么疑惑或者需求，建議聯系我們
http://www.wodeapartment.com進行維護。
In short, the effectiveness of putty powder on walls depends on construction technology and surface quality. To prevent problems, it is necessary to pay attention to selecting appropriate putty powder materials and maintaining suitable environmental conditions. If you have any doubts or needs, it is recommended to contact us http://www.wodeapartment.com Perform maintenance.
魯公網安備